The Cyber has returned and it has been reinforced with Strategic cross beams in the sidewalls to strengthen the head for harder checks.
It was given a wider face design to allow for more interceptions and disrupting the passing lanes and two screw holes in the back of the head to reduce jiggle from erosion.
|Weight Without Mesh (oz.)||5.1|
|Weight Without Mesh (gm.)||145|
|A - Mouth Width/Widest Point (in.)||6 5/8|
|B - Pinch at the 5 inch Mark (in.)||4 1/5|
|C - Pinch at the 3 inch Mark (in.)||3 1/4|
|D - Pinch at the 1.25 inch Mark (in.)||3 1/8|
|E - Throat Length (in.)||2 1/8|
|F - Offset||Minimum Offset = Technology that slightly lowers the head below the center plane of the shaft.|
|Plastic Technology||Multiple Bottom Rail Stringing Holes: Strategically placing an abundance of sidewall stringing holes on the bottom rail to enhanced strength.|
|Sidewall Stringing Holes||18|
|Bottom Rail Configuration||Mid-High/Level 4 Bottom Rail|
|Scoop Shape||Rounded Scoop|
|Top Wall Stringing Holes||6|
I bought this originally assuming that it would be stiff as a board and only good for use on my pole but later found out that this thing is actually a ridiculous faceoff head.
I've used the Blade, CEO and others but nothing compares to this.. it pops straight back into shape after an aggressive battle and the plastic used just makes is flexible but still strong as heck once you break it in.
Best head for faceoffs I've used, similar to the Clutch without pinching ridiculously.
Brine stands behind its heads under stress of normal use for six (6) months from the original date of purchase. Brine will replace all heads unstrung unless the head was purchased strung within the 1st 30 days. Please remove any stringing on the head before sending back the product.
Proof of purchase is required for each return. Proof of purchase can be a receipt, cancelled check, credit card or bank statement, or anything else that clearly indicates the date of purchase. In addition, the purchase must be made through an authorized Brine dealer.
Brine Sports will replace the product with the exact product that is defective. If the product is no longer available, Brine will replace with a different color or upgrade you free of charge if Brine no longer carries that item.
Please fill out Brine's return request form to obtain a Return Authorization Number at http://brine.com/warranty-and-returns/rma-form/.
Please call Brine Customer Service at 800-968-7845 for assistance.
For more information please visit http://brine.com/warranty-and-returns/.